woodworking CNC Router Six sides drilling machine with 2.2Kw Drill
shaft motor power
Parameters
| MODEL | DL3012M6SL |
| Maximum sheet length | 3050mm |
| Minimum sheet length | 150-250mm |
| Maximum sheet width | 1200mm |
| Minimum sheet width | 30mm |
| Maximum sheet thickness | 30mm |
| Minimum sheet thickness | 10mm |
| X Axis speed | ≤80m/min |
| U Axis speed | ≤80m/min |
| Vertical drill shaft | UP(10PIECES) DOWN(9PIECES) |
| Horizontal drill shaft | UP 4+4(X)&(Y) |
| Drill shaft motor power | 2*2.2Kw(Hp) |
| Spindle motor power | 2*2.2Kw(Hp) |
| Spindle speed | 2*18000rmp |
| Compressed air consumption | 450NI/cycle |
| Dust removal air volume | 1,900+550M3/h |
| Dust removal speed | 30M/sec |
| Total motor power | 12Kw |
| Dust removal diameter | 100+80mm |
| Machine weight | 3350kg |
Applications
Panel furniture ,cabinet& closet furniture , office furniture ,
customized furniture , etc the all kinds of holes processing
Machine features
It is capable of horizontal and vertical drilling and grooving on a
variety of materials (particleboard,
medium density fiberboard, plastic and light alloy)；
Servo motion control uses a bus system solution with great
flexibility and high cost performance. The
advantages of traditional solutions are as follows:
1. Save wiring costs, reduce terminal blocks, and reduce the chance
of errors. A bus communication port can be
connected to multiple servos, and the servo can be plugged in with
a simple network cable interface, and the wire is
simple to check.
2,The amount of information is larger: all digital information
interaction can transmit many parameters, commands
4
and status data in two directions; the pulse mode can only transmit
position or speed information in one direction,
and cannot obtain more status or parameters of the servo.
3,High precision, digital communication method: no signal drift
problem, high precision of command and feedback
data.
4,Higher reliability, stronger anti-interference ability, no pulse
loss. Pulse/direction control is unreliable at high
speed pulses.
Machine photo
